How to clean the toilet

Clean the toilet. Hey shit! No one likes cleaning the toilet, they are one of the worst gear so you should finish them as soon as possible. Wear a pair of waterproof rubber gloves (a pair that you use to wash the dishes) when you clean the toilet; latrines may contain many germs and bacteria. 2. Push the outside of the toilet with a sponge dampened with hot water to soften the accumulated dirt. Leave it to suck hot water and go to clean toilet bowl.

1- Then add the bleached or disinfectant material inside the toilet bowl and around the edge. Leave it for a minute until it is absorbed and then call the inner part using the toilet brush. After cleaning, use siphon water to rinse the toilet.

2- When you have finished cleaning the toilet bowl from the inside then move to the outside surfaces. Remove a bit of disinfectant on top of it, then dry it with a cloth cutter or using a paper toilet tissue.

Clean the bathing place.

Shower heads are known to be easy to contaminate and contaminate with germs, but the use of a shower cleaner, a coarse bristle cleaning brush (and some multi-purpose cleaners) can help. If the shower cleaner is not at your fingertips, the dishwashing liquid can remove the dirt accumulated on the bottom of the bathtub as it removes the dirt from the dishes. Then complete the cleaning process using a disinfectant or anti-bacteria as you may have used to do.

1- To clean the glass, use half a cup of ammonia with 8 drops of dishwashing liquid with about four liters of water to polish. the glass.

Clean the tub. In most cases, cleaning the bathtub is a heavy task. Before you start using the cleaner, make sure that it is suitable for the surface. After making sure that it is also spread over the surface of the aquarium and leave it for a minute to react with bacteria and dirt and then strongly advocate using a piece of spongy. When the aquarium appears to be shiny and clean, rinse it with warm water and dry it with a cotton cloth or tissue.

1- If there are hard spots, you may use a rough brush to disassemble. It is advisable to use a rough wire brush like the ones you use to clean the shower.